| Sector | abcSecurity Services | Tender Value | N.A. | Location | Orissa (Odisha) - India | Ref.No | 86702692 | Closing Date | 08 - Sep - 2025 | | | Special Repairs of Health Care Centre Building (old) at Itr Chandipur Under Ge(i) R&d Chandipur ,2.0 Demolishing Cement Concrete of Any Description and in Any Position Not Otherwise Specifically Provided for Manually / By Mechanical Means Including Disposal of Material at Any Lead Complete All as Specified and as Directed. ,m&l for Taking Down Existing Wpt of Any Description Including Pcc Padding Etc. Roughening Surfaces of Old Concrete Floors / Slabs and Washing Down with Water to Remove Dust Particles Complete Including Preparation of Surface to Receive Plastering and Removal of Debris Outside Md Land Complete All as Specified and as Directed By Eng-in-charge. ,m&l for Pcc on Roof Padding with Cement Concrete 124 Type B-0 (1 Cement 2 Coarse Sand 4 Graded Stone Aggregate 12.5mm Nominal Size) Mixed with Wpc Complete All as Specifed and as Directed. note - Wpc Shall Be Measured Separately ,m&l for Cutting Grooves in Brick/concrete Wall 75 Mm Wide and 65 Mm Deep and Shaping Horizontal of Grooves with Cm 13 Complete All as Specified and Directed. ,providing and Laying App (atactic Polypropylene Polymer) Modified Prefabricated Five Layer 3 Mm Thick Water Proofing Membrane, Black Finished Reinforced with Non-woven Polyester Matt Consisting of a Coat of Bitumen Primer for Bitumen Membrane @ 0.40 Litre/sqm By the Same Membrane Manufacture of Density at 25°c, 0.87-0.89 Kg/litre and Viscocity 70-160 Cps. Over the Primer Coat the Layer of Membrane Shall Be Laid Using Butane Torch and Sealing All Joints Etc, and Preparing the Surface Complete. the Vital Physical and Chemical Parameters of the Membrane Shall Be as Under Joint Strength in Longitudinal and Transverse Direction at 23°c as 650/ 450n/ 5cm. Tear Strength in Longitudinal and Transverse Direction as 300/250n. Softening Point of Membrane Not Less Than 150°c. Cold Flexibility Shall Be Upto -2°c When Tested in Accordance with Astm, D - 5147. the Laying of Membrane Shall Be Got Done Through the Authorised Applicator of the Manufacturer of Membrane Complete All as Specified and Directed. ,m&l for Heat Resistant Tiles 300x300 Or More in Roof (minimum 8 Mm Thickness Or to Be Specified By the Manufacturer Which Ever is Higher) in Any Colour and Shade as Approved By Ge Over App Membrane Jointed with Neat Cement Slurry Mixed with Pigment to Match the Shade of Tiles Complete Laid Over 20 Mm Thick Bed of Cement Mortar 14 (1 Cement 4 Coarse Sand) Complete All as Specified and as Directed. ,dismantling Tile Work of Any Thickness in Floors, Walls and Roofs Including Cement Mortar Bedding, Removing of Rubbish Material Upto Any Lead Complete All as Specified and as Directed By Eng-in-charge. ,dismantling Old Plaster Or Skirting Raking Out Joints and Cleaning the Surface for Plaster Including Disposal of Rubbish to the Dumping Ground Within 500 M Lead Complete All as Specified and as Directed By Eng-in-charge. ,m&l for Providing and Laying Double Charge Vitrified Tile Polished Finish of Size 600 X 1200 Mm Or More in Floor (minimum 8 Mm Thickness Or to Be Specified By the Manufacturer Which Ever is Higher) in Any Colour and Shade as Approved By Ge with Water Absorption Less Than 0.08% and Conforming to Is15622, of Approved Brand & Manufacturer, Laid on 20 Mm Thick Cement Mortar 14 (1 Cement 4 Coarse Sand) Jointing with Grey Cement Slurry @3kg/sqm Including Grouting the Joints with White Cement and Matching Pigments Etc. the Tiles Must Be Cut with the Zero Chipping Diamond Cutter Only . Laying of Tiles Will Be Done with the Notch Trowel, Plier, Wedge, Clips of Required Thickness, Leveling System and Rubber Mallet for Placing the Tiles Gently and Easily Complete All as Specified and Directed ,providing and Laying Non Skid Ceramic Floor Tiles 7-8 Mm Thick of Size 300x300mm Or More of 1st Quality Conforming to is 15622, in Any Colour and Shade as Approved By Ge of Approved Brand & Manufacturer, Laid on 20 Mm Thick Cement Mortar 14 (1 Cement 4 Coarse Sand), Jointing with Grey Cement Slurry @ 3kg/sqm Including Grouting the Joints with White Cement and Matching Pigments Etc., Complete All as Specified and Directed ,providing and Fixing 1st Quality Ceramic Glazed Wall Tiles 450x300x7mm / 600x300x7mm Conforming to Is 15622, in Any Colour and Shade as Approved By Ge of Approved Brand & Manufacturer in Skirting, Risers of Steps and Dados, Over 12 Mm Thick Bed of Cement Mortar 13 (1 Cement 3 Coarse Sand) and Jointing with Grey Cement Slurry @ 3.3kg Per Sqm, Including Pointing in White Cement Mixed with Pigment of Matching Shade Complete All as Specified and Directed ,providing and Laying in Position Cement Concrete 124 Using 20mm Nominal Size Aggregate Including the Cost of Centering and Shuttering Complete All as Specified and Directed. ,providing and Laying 60mm Thick Factory Made Cement Concrete Interlocking Paver Block of M-30 Grade Made By Block Making Machine with Strong Vibratory Compaction, of Approved Size, Design & Shape, Laid in Required Colour and Patter |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|